Imoto kunye ne-Electronic Wire Harness Assembley Line

Inkcazelo emfutshane:

Umgca wokuhlanganisa iingcingo zokubopha yinkqubo yokuvelisa iintambo zodidi oluphezulu ezisetyenziswa kwizinto ezahlukeneyo ezifana neemoto, izixhobo zombane, kunye noomatshini boshishino.Intambo yokuhlanganisa iintambo zokubopha ibandakanya amanyathelo amaninzi ekufuneka elandelwe ukuqinisekisa ukuba imveliso yokugqibela ikumgangatho ophezulu kwaye ihlangabezana nayo yonke imigangatho efunekayo.

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

Iithegi zeMveliso

Inkcazo

Nanga amanye amanyathelo abandakanyekayo kumgca wokudityaniswa kweentambo zokubopha:

● 1. Ukusika iintambo: Isinyathelo sokuqala kumgca wokuhlanganisa i-wiring harness kukusika iingcingo kubude obufunekayo.Oku kwenziwa ngokusebenzisa umatshini wokusika ucingo oluqinisekisa ukusika okuhambelanayo kunye nokuchanekileyo.

● 2. Ukuqhawula: Emva kokuba ucingo lusikwe kubude obufunekayo, ukugquma kocingo kuyakhutshwa kusetyenziswa umatshini wokuqhawula.Oku kwenziwa ukuze kuqinisekiswe ukuba ucingo lobhedu luvezwe ukuze lukwazi ukunqanyulwa kwizihlanganisi.

● 3. I-Crimping: I-Crimping yinkqubo yokudibanisa izixhumi kwintambo evulekileyo.Oku kwenziwa ngokusebenzisa umatshini we-crimping ofaka uxinzelelo kwikhonkco, ukuqinisekisa uxhulumaniso olukhuselekileyo.

● 4. I-Soldering: I-Soldering yinkqubo yokunyibilika kwe-solder kwi-joint phakathi kocingo kunye nekhonkco ukuqinisekisa ukuxhamla okukhuselekileyo kunye nexesha elide.I-Soldering idla ngokusetyenziswa kwizicelo apho kukho ukungcangcazela okuphezulu okanye uxinzelelo lomatshini olusetyenziswayo.

● 5. I-Braiding: I-Braiding yinkqubo yokudibanisa okanye ukuwela iingcingo ukuze zenze umkhono okhuselayo ojikeleze iingcingo enye okanye ezininzi.Oku kunceda ukukhusela iingcingo kwi-abrasion okanye umonakalo.

● 6. Ukucofa: Ukucofa yinkqubo yokusongela intambo yocingo egqityiweyo kunye ne-tape yokukhusela ukukhusela kumswakama, uthuli okanye nayiphi na into yangaphandle engonakalisa ucingo.

● 7. Ukulawulwa komgangatho: Emva kokuba intambo yocingo igqityiwe, ihamba ngenkqubo yokulawula umgangatho ukuqinisekisa ukuba ihlangabezana nemigangatho ethile kunye neenkcukacha.Oku kwenziwa ngokuvavanya i-wire harness ye-conductivity, ukumelana nokugquma, ukuqhubeka, kunye nezinye iindlela.

Ukuqukumbela, umgca wokuhlanganisa iingcingo zombane yinkqubo entsonkothileyo nebalulekileyo ebandakanya amanyathelo aliqela ukuqinisekisa ukuveliswa komgangatho ophezulu wokubopha ucingo.Isinyathelo ngasinye kwinkqubo kufuneka iqhutywe ngokucophelela ukufezekisa umphumo oyifunayo, kwaye imveliso egqityiweyo kufuneka ihlangabezane nayo yonke imigangatho efunekayo kunye neenkcukacha.

Ukuhlelwa

I-Yongjie ibonelela ngesakhiwo esomeleleyo nesiqinileyo somgca wendibano.Iqonga lokusebenza linokuthambeka ngokuchasene nomsebenzisi njengoko umfanekiso ubonisa.